space:lasercutter

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
space:lasercutter [2018/12/16 19:15]
raffael.tschui [[Lightburn] Coordinate System has an offset]
space:lasercutter [2020/07/20 11:00] (current)
gsurrel Change image to a text table
Line 1: Line 1:
 ====== FabCreator MK5 Lasercutter ====== ====== FabCreator MK5 Lasercutter ======
  
 +===== Specifications =====
 +
 +Maximum work area: 680×470×125 mm
 +
 +|Machine Size|1150×750×450mm|
 +|Work Area|680×470×125mm|
 +|Operational Accuracy|+-0.1mm|
 +|Max Cutting Depth|12mm Poplar Ply, 6mm MDF, 6mm Acrylic|
 +|Max Speed|Vector 30mm/s - Raster 300mm/s*|
 +|File Formats|SVG, DXF, Ai, PDF, BMP, PNG, JPEG|
 +|Connectivity|Standalone, WiFi, USB|
 +|Material Focus|Auto Focus - Mechanical Sensor|
 +|Passthrough|680x100xInfinite|
 +|4th axis|Compatible|
 +|Drive|0.9° Hybrid Stepper|
 +|Belts|Polyurethane Steel Core|
 +|Noise Level|Below 65dB|
 +|Software|LaserWeb - LightBurn|
 +|Power Usage|220-240VAC 50Hz 5A MAX|
 +|Extraction|500m3/h Fan Standard|
 +|Cooling|Active Refrigerant Chiller|
 +|Optics|II-VI Infrared|
 +|Controller|32 Bit Smoothieboard|
 +|Output Power|45W Peak|
 +|Mode Quality|M2 < 1.5|
 +|Beam Diameter|4 - 4.5mm|
 +|Beam Mode|TEM00|
 +|Beam Divergence|3.5mR|
 +|Wavelength|10.57 - 10.63μm|
  
 ===== Material library ===== ===== Material library =====
Line 6: Line 35:
 ==== What can I cut/engrave? ==== ==== What can I cut/engrave? ====
  
-[[https://www.fabcreator.com/Fabkit#Making]] +| Fabric | Yes | 
-{{ :space:materials_fabkit-01.png?400 |}}+Felt | Yes | 
 +| Paper | Yes | 
 +| Cardboard | Yes | 
 +| MDF | 6mm | 
 +| Poplar Plywood | 12mm | 
 +| Birch Plywood | 8mm | 
 +| Leather | 2mm | 
 +| Acrylic | 8mm | 
 +| Kraftplex | 3mm (Max available) | 
 +| Glass | Engrave Only | 
 +| Ceramic | Engrave Only | 
 +| Granite | Engrave Only | 
 +| Anodized Aluminium | Engrave Only | 
 +| Powder coat | Engrave Only | 
 +| Bare Metals | No |
  
 ==== Proven speed/power settings ==== ==== Proven speed/power settings ====
Line 22: Line 65:
 ==== Install LaserWeb on your own Laptop ==== ==== Install LaserWeb on your own Laptop ====
  
-Follow the instructions here:+It is recommended to use the LightBurn software installed on our machine. However, if for some reason you want to control the laser from your computer, follow the instructions here:
  
 [[http://community.fabcreator.com/t/fabkit-mk5-laser-web-settings-and-profiles/115]] [[http://community.fabcreator.com/t/fabkit-mk5-laser-web-settings-and-profiles/115]]
  • space/lasercutter.1544984112.txt.gz
  • Last modified: 2 years ago
  • by raffael.tschui