This is an old revision of the document!

C94-M8P-2 Application Board (dGPS)

  • Pay special attention to ESD protection!
  • Rover and Base antennas must use ground planes. Doing otherwise will make convergence times long. The ground plane should have a minimum diameter of 10 cm. [1]
  • Both UHF radio and the NEO-M8P operate on 3.3V. The app board provides inputs for 5V USB or 3.7-20V which we don't use.
  • This device has a single UART port. By default, it accepts RTCM (correction messages), UBX, NMEA as input and gives UBX, NMEA as output.
  • orb/c94-m8p.1467710496.txt.gz
  • Last modified: 6 years ago
  • by sam